YS/T 539.12-2006 镍基合金粉化学分析方法 正丁醇-三氯甲烷萃取分光光度法测定磷量

作者:标准资料网 时间:2024-05-14 17:35:02   浏览:9477   来源:标准资料网
下载地址: 点击此处下载
基本信息
标准名称:镍基合金粉化学分析方法 正丁醇-三氯甲烷萃取分光光度法测定磷量
英文名称:Nickel base alloy powder -- Determination of phosphorus content -- N-butyl alcohol-chloroform extraction spectrophotometric method
中标分类: 冶金 >> 金属化学分析方法 >> 稀有金属及其合金分析方法
ICS分类: 冶金 >> 有色金属 >> 镍、铬及其合金
替代情况:原标准号GB/T 8638.12-1988;被YS/T 539.12-2009代替
发布日期:2006-07-27
实施日期:2006-10-11
首发日期:
作废日期:2010-06-01
出版社:中国标准出版社
出版日期:2006-10-11
页数:3页
适用范围

没有内容

前言

没有内容

目录

没有内容

引用标准

没有内容

所属分类: 冶金 金属化学分析方法 稀有金属及其合金分析方法 冶金 有色金属 镍 铬及其合金
下载地址: 点击此处下载
【英文标准名称】:Recommendedpracticeforestablishingtransformercapabilitywhensupplyingnonsinusoidalloadcurrents
【原文标准名称】:施加非正弦负载电流的变压器性能确定的推荐规程
【标准号】:IEEEC57.110-1998
【标准状态】:作废
【国别】:美国
【发布日期】:1998
【实施或试行日期】:
【发布单位】:美国电气电子工程师学会(IEEE)
【起草单位】:IEEE
【标准类型】:()
【标准水平】:()
【中文主题词】:输出电流;变压器;电气工程;放电流;性能
【英文主题词】:Chargingcurrent;Electricalengineering;Outputcurrents;Performance;Transformers
【摘要】:Establishesuniformmethodsfordeterminingthecapabilityoftransformerstosupplynonsinusoidalloadcurrentsofknowncharacteristics.
【中国标准分类号】:K41
【国际标准分类号】:29_180
【页数】:46P;A4
【正文语种】:英语


【英文标准名称】:Seamlessandwelded(exceptsubmergedarc-welded)steeltubesforpressurepurposes;fullperipheralultrasonictestingforthedetectionoflongitudinalimperfections
【原文标准名称】:压力用途的无缝钢管和焊接(埋弧焊除外)钢管检测纵向缺陷用全周边超声波试验
【标准号】:ISO9303-1989
【标准状态】:作废
【国别】:国际
【发布日期】:1989-08
【实施或试行日期】:1989-07-15
【发布单位】:国际标准化组织(IX-ISO)
【起草单位】:ISO/TC17
【标准类型】:()
【标准水平】:()
【中文主题词】:金属管;钢管;超声检验;测定;缺陷与故障;管;试验;无损检验;压力容器;有缝管;压力管;无缝管;焊接管
【英文主题词】:Compressionstresses;Defects;Determination;Dimensions;Electromagnetictests;Impermeability;Internalpressure;Internalpressuretubes;Leaktests;Longitudinalflaws;Metaltubes;Non-destructivetesting;Pipes;Pressurepipes;Pressurevessels;Seamedpipes;Seamlesspipes;Specification(approval);Steelpipes;Steeltubes;Steels;Testing;Tests;Ultrasonictesting
【摘要】:Isapplicabletotheinspectionoftubeswithanoutsidediametergreaterthanorequalto9mm,andwithanoutsidediameter-to-thicknessratiogreaterthanorequalto5.Specifiesgeneralrequirements,methodoftest,referencestandards,referencenotch,equipmentcalibrationandchecking,acceptanceandtestreport.AnnexAcontainsinformationconcerningtestingoftubeshavinganoutsidediameter-to-thicknessratiolessthan5.
【中国标准分类号】:H26
【国际标准分类号】:23_040_10
【页数】:4P;A4
【正文语种】:英语